| 장비개요 |
입력 연결부는 양쪽이 1/4" 와 XLR로 되어있고 XLR을 통하여 언발란스 신호를 XLR 스루아웃을 통해 발란스 출력으로 변환할 수 있습니다. |
| Input Impedance |
1 mOhm (pad at 0dB), 47 kOhm (pad at -20dB or -40dB) |
| Max Input |
+9dBu (pad at 0dB), +29dBu (pad at -20dB), +49dBu (pad at -40dB) |
| Input Connectors |
Two Parallel 1/4" jack connectors (Tip Hot +ve, Sleeve ground), and a parallel XLR connector (unbalanced) (Pin 2 Hot +ve, Pin 1 & 3 ground) |
| Output |
Transformer Balanced |
| Max Output |
+8dBu into 600 Ohms or greater |
| Output Connectors |
XLR3-32 or equivalent |
| THD |
< 0.005% at 1khz, 0dbu output |
| Noise |
< -105db unweighted, 22hz-22khz, rms* |
| Frequency Response |
30Hz to 20kHz, +0dB/-1dB |
| Main/Standby battery |
9 volt PP3 type, preferably alkaline |
| Power Consumption |
on phantom: less than 7.5mA, on battery: less than 2mA. |
| Phantom Power |
+20 volts DC to +48 volts DC |
| Unit Weight |
650 gms, excluding batteries |
| Dimensions |
59 mm x 124 mm x 143 mm (2.3" x 4.9" x 5.6") |
Inter M
